SA-X (HV)
ALL INFORMATION OTHER THAN THE TABLE IS PLACEHOLDER INFORMATION FROM ANOTHER PAGE
Motion Control Systems' 4th Generation series of PWM servo amplifiers combines over 25 years of experience building reliable, high-powered amplifiers with the latest in networking and connectivity. Standard interfaces include Ethernet, EtherCAT, CANopen, USB, RS-232 serial and analog voltage command. Setup is easily done through a web browser interface and has options for on-the-fly selectability for position, torque or velocity control.
SA X-Series drives are suitable for all existing installations with easy configuration transfer from legacy drive products. Connectors are location and pin-out compatible. Pre-configuration is available for most applications.
SA drives feature true sinewave commutation from incremental encoder, sinewave encoder, resolver or BiSS encoder. Also 6-Step and 20-Step for motors that include Hall devices.
SA-X (HV) Series Feature Highlights
- ALL PLACEHOLDER FROM ANOTHER PAGE
- Stand-alone or network connectivity
- EtherCAT, CANopen, USB, RS232 or +/10V Analog
- Position, Velocity or Torque control (selectable)
- Encoder, Resolver or Hall commutation
- Webserver-based status, configuration, and firmware updates
- Backward compatibility with all MCS drives
Performance and Characteristics
| Amplifier Model | SA6000-XHV | SA10000-XHV | SA10000-XHVHF | SA20000-XHV |
|---|---|---|---|---|
| Output Current (A) Continuous / Peak for 3 Sec | 50 / 100 | 90 / 180 | 100 / 200 | 200 / 300 |
| Input Power Requirement | Main AC Input: 360 to 480VAC, 3-phase (50/60Hz) Logic AC Input: 100-240VAC, 1-phase (50/60 Hz) |
|||
| PWM Frequency | Up to 16 kHz (depending on model and application) | |||
| Communications | Ethernet, RS232 | |||
| Commutation | 6-Step HED, 20-Step HED, Incremental Encoder, Sinewave Encoder, Resolver | |||
| Current Loop Bandwidth | Up to 4 kHz (depending on motor and application) | |||
| Efficiency | > 95% | |||
| Primary Cooling | Forced-Air Cooled | Liquid-Cooled | ||