SA10000X
Motion Control Systems' 4th Generation series of PWM servo amplifiers combines over 25 years of experience building reliable, high-powered amplifiers with the latest in networking and connectivity. Standard interfaces include Ethernet, EtherCAT, CANopen, USB, RS-232 serial and analog voltage command. Setup is easily done through a web browser interface and has options for on-the-fly selectability for position, torque or velocity control.
SA X-Series drives are suitable for all existing installations with easy configuration transfer from legacy drive products. Connectors are location and pin-out compatible. Pre-configuration is available for most applications.
SA drives feature true sinewave commutation from incremental encoder, sinewave encoder, resolver or BiSS encoder. Also 6-Step and 20-Step for motors that include Hall devices.
SA X-Series Feature Highlights
- Stand-alone or network connectivity
- EtherCAT, CANopen, USB, RS232 or +/10V Analog
- Position, Velocity or Torque control (selectable)
- Encoder, Resolver or Hall commutation
- Webserver-based status, configuration, and firmware updates
- Backward compatibility with all MCS drives
Performance and Characteristics
Output Rating (MAX) |
|
| Motor Current | 300 Amps |
| Continuous Current | 200 Amps |
| Bus Voltage | 280-340 VDC |
General Specifications (Typical) |
|
| Current Loop Bandwidth | 5 kHZ |
| Speed Regulation | < 0.0001% (encoder dependent) |
| Analog Command Inputs | +/- 10 Volts, sine sine + 120 current request |
| Encoder Outputs | TTL, single ended or differential |
| Standard Input Power | 200-240VAC Three Phase 50Hz or 60Hz |
PDF Drawings |
|
| Connector Locations | Outline and Mounting Dimensions |